Výrobky/Inštalácia/Jadrové vrtanie/Vŕtacie korunky

Dia-NTBK DX HSP-Set 82-112-132mm, 1.1/4"

Installers, service technicians and electricians combine their hand-operated or stationary core drill system with a suitable DX-High Speed Plus diamond drill bit for an easy production of core drillings in reinforced concrete (wet drilling) or masonry and lime sand brick (dry drilling) up to a depth of 400 mm without the need of an extension.

Vybraný variant:Dia-NTBK DX HSP-Set 82-112-132mm, 1.1/4"
Objednávkové číslo:19014
Vyberte iný variant
  • Space welding: cold welding process according to cutting-edge bonding technology. Use of the complete diamond segment without waste due to a neutral zone PRISMACUT: Four drill nodules on the diamond segment improve the drill behaviour and provide optimal water cooling at the same time Exact rotation reduces wear Easy and secure first cut in hand-operated mode Fast drilling progress and extreme service life Space Welding and PRISMACUT

  • DX High Speed Plus, 1.1/4"UNC, D=82mm, NL=430mm

    DX High Speed Plus, 1.1/4"UNC, D=112mm, NL=430mm

    DX High Speed Plus, 1.1/4"UNC, D=132mm, NL=430mm

Vyberte si variant

Dia-NTBK DX HSP-Set 82-112-132mm, 1.1/4"

19014

DX High Speed Plus, 1.1/4"UNC, D=82mm, NL=430mm

DX High Speed Plus, 1.1/4"UNC, D=112mm, NL=430mm

DX High Speed Plus, 1.1/4"UNC, D=132mm, NL=430mm

Korunka diamantovej vŕtačky DX-HIGH SPEED PLUS, 1.1/4

FF44300

DX High Speed Plus, 1.1/4"UNC, D=300mm, NL=430mm

Korunka diamantovej vŕtačky DX-HIGH SPEED PLUS, 1.1/4

FF44220

DX High Speed Plus, 1.1/4"UNC, D=220mm, NL=430mm

Korunka diamantovej vŕtačky DX-HIGH SPEED PLUS, 1.1/4

FF44200

DX High Speed Plus, 1.1/4"UNC, D=200mm, NL=430mm